[UNI] DASHBOARD.INC (торговля 28 парами с одной доски)

Брокер ИнстаТрейдер. К сожалению сделки удалил.В начале было примерно 5700,через 4-5 дней 5550.Убыточных сделок было на порядок больше.Лот на второй день поставил 0,1.Понимаю,что у меня с настройками нужно что то менять.

обещал выше постом скрины ....

---

Добавлено: 22-08-2016 15:40:48

---

Sergio7625, разложи по полочкам "ЧТО" сливное:
1.Какое то время, торговая сессия.
2.Какой брокер и спред.
вмешивался ли вручную к закрытию, усреднению.

Мой сет сейчас на скрине ниже. Естественно ЖДУ dermitay, пока баловство ...

В Зелло есть любители ручной торговли, им в помощь БДМ, и еще можо забацать 2 сета:
1.Сет с отражением только сильных пар на старших ТФ с отключенной автоторговлей. И мониторить откаты по подсвечиваемым парам.
2.Сет как на скрине с автоторговлей. То есть 1-й вход совершит доска на откате, а дальше уже на ваш выбор, усреднить его в лучшем месте или нет.

Также неоднократно говорилось о времени. НОЧЬЮ и после закрытия ондона как правило сливные сделки... Лучшее время 10:15 до 18:30

Тот редкий случай когда вообще ВСЕ зелененькое ....

Перед выходом на улицу поставил отложки в СТОРОНУ тренда на ближайших уровнях ....

Подскажите дощечку для ручной торговли? дайте ссылку на нее если не трудно.

Почему трудно найти насторйки для доски, что бы рубить бабло каждый день? По моим наблюдениям, вот настроишь доску, день-два работает, потом хоп 3 день сливает...
Я думаю нужно учитывать трендовый день или флетовый. Может быть применять рси на дневном графике для этого. Если выходит за границы, трендовый, если нет, то работает доска на флете, то-есть работаем на отскок от уровней. Кто что думает по этому поводу?
Попробуй эту доску.

Dasb_Fibo_v5.ex493 скач.

Тоже считаю главный вопрос это определить тренд или флет,от этого много зависит.Но RCI я бы не стал применять,поставил его на несколько пар которые сегодня шли без отката и везде нужны разные параметры что бы был выход за границу.Я бы рекомендовал обратить внимание на параметры RS(Relative/Recent Strength)и BQR(Base/Quote Ratio)и допустим выставить параметры BQR для флета min 2 max 4,что пара сильная и идет в одном направление доска не открывала сделки,и для тренда min 5 max9.Попробую завтра поставить и проверить.

I got this error
How i can fix it?

2016.08.26 17:22:54.975 SimEA_Desk_v2.0_em1 AUDCAD,M1: Alert: NoFound Desk, EA is't working


Thankyou

Спойлер

I got this error
How i can fix it?

2016.08.26 17:22:54.975 SimEA_Desk_v2.0_em1 AUDCAD,M1: Alert: NoFound Desk, EA is't working


Thankyou

SimEA dont work whith new DashBoards
Delete SimEA from chart to avoid this error

Мне понравилась идея dashboard multi v2, но есть v4 --
И сама доска v7a3 --

Dashboard_-_Multi_V4auto.ex499 скач.
Dashboard_-_Multi_V4auto.mq4125 скач.
DBMASMEAX007a3.ex498 скач.
DBMASMEAX007a3.set116 скач.

На 09.11.2016 - последняя доска...

DBMASMEAX007a3.update012.6.zip81 скач.

На 09.11.2016 - последняя доска...

DBMASMEAX007a3.update012.7.zip129 скач.
DBMASMEAX007a3.bundle3.zip122 скач.

Спойлер

На 09.11.2016 - последняя доска...

хех ... это уже НЕ последняя. Вот последняя:

Вот описание нововведений на инглише:

Спойлер

DBMASMEAX007a3.update12 (20161023):

~ Hold filter:
+ Scope: hold «bars,period» since last open order [experimental]
Comma separated «bars,period». Period can be any regular
time-frame or a custom off-line one (by now, to properly
work with off-line charts, they should be open.
- Define "hold minutes since last [...] order" [H] scope
+ Define "hold minutes since last open order" [H] scope
+ Define "hold minutes since last closed order" [H] scope
- Define "one order per bar (order [...] time)" [H] scope
+ Define "one order per bar (order open time)" [H] scope
+ Define "one order per bar (order close time)" [H] scope
+ Define "hold «bars,period» since last open order" [H] scope

~ Charts:
- Timeframe to open a new chart
- Template to use when opening a new chart
+ Use «template,timeframe» to open charts [NEW WAY]
Comma separated «template,timeframe». The two removed
inputs merged into this one, where «timeframe» can be
any regular time-frame or a custom off-line one as long
as it's available.

~ Interface:
+ Edit box for «template,timeframe».
+ Informative box for Sit-On-Hands scopes.
+ Color for «Exit(close) on opposite signal» (default=Gainsboro).
+ Color for «Exit(close) on absent signal» (default=Black)
+ Color for «Exit(close) on lost signal» (default=DimGray)
~ Other minor changes/updates.

Pay attention to Hold and Chart sections while importing
ancient presets since some definitions there had to be renamed.

Updated releases of MADdash and BidRadio PINS with reverse option added

=================================================================
DBMASMEAX007a3.update11 (201610141356):

~ Attempt to have a better integration between close/exit scopes.

When using mixed exit modes/scopes, all have to match... unless
it's enabled the «Close on any enabled close/exit alert» feature.

!! Fixed?
http://www.forexfactory.com/showthread.php?p=9196137#post9196137

=================================================================

DBMASMEAX007a3 (201610100323): Most Relevant since last update:

+ PINS only mode (hide all - not disabling) added.
+ Preset for the Enable trigger on any enabled Close[C] alert.
+ PINS exit scope added: lost signal (in default color scheme, [X] is dimmed).

Mixed exit modes/scopes requires the «Close on any enabled close/exit alert»
feature to be enabled ([ANY] button right over [Close] or it related preset).

!! Fixed?
http://www.forexfactory.com/showthread.php?p=9174845#post9174845
http://www.forexfactory.com/showthread.php?p=9182281#post9182281
http://www.forexfactory.com/showthread.php?p=9179793#post9179793
http://www.forexfactory.com/showthread.php?p=9181138#post9181138
http://www.forexfactory.com/showthread.php?p=9188136#post9188136

=================================================================

DBMASMEAX007a3 (20161002): Most Relevant since last update:

+ Close matching ANY enabled close/exit alert.
+ RS exit on opposite signal and reverse it own signal [EXPERIMENTAL].
+ BQR exit on opposite signal and reverse it own signal [EXPERIMENTAL].
+ Button for the auto-close filter based on order pips offset.
+ Buttons to Show/Hide News and Clock.
+ News, Sessions and MTSA boxes can be moved by dragging them with the mouse.
How-to: Hover the box until read a "double-click to make it movable" tool-tip
and do what it says. A white dot will appear on the top left corner of that box
indicating that it's ready to be dragged to wherever you want.
+ Hold entry till next bar (selectable time-frame).
+ PINS extended to 6.
+ Experimental PINS only mode (disable all but PINS module).

Some minor additions/corrections/amendments/adjustments...
Bugs nor issues fixed and probably new ones introduced... as usual ;)

=================================================================
DBMASMEAX007a3 (20160923): Bug-fix update

Fixed?: (it seems it only happens when having a custom symbols selection)
! http://www.forexfactory.com/showthread.php?p=9156617#post9156617

=================================================================
DBMASMEAX007a3 (20160922): Bug-fix update

Fixed?:
! http://www.forexfactory.com/showthread.php?p=9156077#post9156077
! http://www.forexfactory.com/showthread.php?p=9141815#post9141815

Improved/extended (scope chooser #2 could be removed if found redundant due to new scopes)
~ http://www.forexfactory.com/showthread.php?p=9155436#post9155436

Added (draft, disabled by default)
+ http://www.forexfactory.com/showthread.php?p=9141738#post9141738

=================================================================
DBMASMEAX007a3 (20160908): Bug-fix update

GAP: Fixed exit on opposite signal issue (http://www.forexfactory.com/showthread.php?p=9126374#post9126374)
BQR: Arrows mean [preview] (http://www.forexfactory.com/showthread.php?p=9115905#post9115905)

=================================================================
DBMASMEAX007a3 (20160902): Bug-fix update

Fixed Profit Tracker displaying today trades in yesterday's row.

=================================================================
DBMASMEAX007a3 (20160901): Most Relevant since last update:

Bundle package including new versions of all files (files of any previous bundle or update can be discarded).

Extract files preserving all sub-folders.

! Fixed bug in PIN exit/close on absence of signal in reverse mode.

Other minor bugs nor issues fixed and surely new ones introduced... ;)

=================================================================
DBMASMEAX007a2 (20160829): Relevant since last update:

+ [Auto] Close[C] allowed after session hours (default=true).
+ Hide alerts surpassing allowed spread threshold (default=false).
+ Snapshot auto-size to current chart window (default=true).
+ PINS exit/close scope added: absence of signal. [EXPERIMENTAL]
[X] highlighted (default: red bg, white fg) = opposite signal (scope so far)
[X] dimmed down (default: red bg, black fg) = absence of signal (added scope)
+ PSO: Daily Open Bar to watch: Current-Previous2 (default=Current).
+ Expert properties by clicking the Smiley at top left.

Bugs nor issues reported by users (and fixed):
http://www.forexfactory.com/showthread.php?p=9065724#post9065724
http://www.forexfactory.com/showthread.php?p=9078473#post9078473
http://www.forexfactory.com/showthread.php?p=9081183#post9081183
http://www.forexfactory.com/showthread.php?p=9103938#post9103938

Other bugs nor issues fixed and probably new ones introduced... as usual as well ;)

=================================================================
DBMASMEAX007a1 (20160727): Relevant since last update:

+ Improved integration with external PINS, mostly related to auto-placement.

=================================================================
DBMASMEAX007a0 (20160727): Most relevant since last update:

+ Reverse the CCI signal (only from EA properties by now)
+ Enabled directional arrows to RSI and CCI.
+ Showing MaxH and MaxL per pair while hovering the orders block rows.
~ Reworked Strength% and Bias directional arrows.
~ NewsCal and NewsBrk became disabled by default (both can be enabled from properties or loaded standalone).

+ Included an experimental Indicator/PIN 'DBMASMEAXPIN_BRdash_v001' to play with:
I have it in the following folder: '{MT4_Data_Folder}\MQL4\Indicators\PINS'
by now but it can be in any place as long as it's under 'Indicators' tree.
It has it own color scheme hard-coded by now, and it can inherit whatever
color scheme you have set in your EAX (running EAX required of course).

! Some bugs fixed and probably new ones introduced... as usual ;)

=================================================================
DBMultiASMdevX006g3 (20160721): Relevant since last update:

I've noticed that MT4 build 988 changed the way it deals with objects
tool-tips, thus this update is to adapt to that new MT4 behaviour.

=================================================================
DBMultiASMdevX006g2 (20160719): Relevant since last update:

This is a bug-fix revision related to what was reported in the following posts:
http://www.forexfactory.com/showthread.php?p=9035628#post9035628
http://www.forexfactory.com/showthread.php?p=9037981#post9037981

=================================================================
DBMultiASMdevX006g1 (20160717): Most relevant since last update:

+ Buttons to interactively increase/decrease won/lost basket(s) targets.
+ Comma separated symbol(s) list to auto-deselect at start.
+ Maximum price slippage for open and close orders can be set separately.
+ Own News Calendar report reworked.
+ PTZ: Option to enable/disable R1/R2 as LongsTZ and S1/S2 as ShortTZ (was hard-coded enabled).
+ FTZ: Option to enable/disable High to +200% as LongsTZ and Low to -200% as ShortsTZ (was hard-coded enabled).

! Several improvements or minor additions and some new bugs as usual as well.

=================================================================
DBMultiASMdevX006g0 (Not released): Most relevant since last update:

This was mostly a bug-fix revision.

+ Shows last order open and close time while hovering the orders block rows.

! Many bug-fixes and some new ones as usual as well.

=================================================================
DBMultiASMdevX006g (20160304): Most relevant since last update:

+ Button to take snapshot of current screen state [SS]. A pop-up alert will show where it was saved and under what name.

+ Button to enable [BDM] charts pop-ups if dashboard is set to be used as [DASH] in BDM.

+ Set [TP|SL] buttons are now independent of each other so you can set one not messing with the other. A combined [TP&SL] is available as well.

- Clear TP/SL button removed because setting [TP&SL] to 0 has the same effect now.

+ Most on-screen increase/decrease arrows replaced by edit boxes.

+ Basket Profit Lock levels modifiable on-screen live.

+ Sessions can be enabled/disabled on-screen live.

+ Experimental persistence of most of the settings that can be modified on-screen.
Any persistent setting have precedence over EA preferences settings.
This experimental feature is magic number based, thus you can have different persistent settings using different magic numbers.

~ Pivot points Trigger Zone [PTZ] filter (experimental):
+ MN1 (in addition to previously added D1 and W1).
+ Option to make this filter to act as trigger.
+ Option to make R3/R4+ a ShortsTZ and below S3/S4+ a LongsTZ.
+ Narrow version to save screen space.

~ Fibonacci Trigger Zones [FTZ] filter (experimental):
+ MN1 (in addition to previously added D1 and W1).
+ Option to make this filter to act as trigger.
+ Option to make above +200% a ShortsTZ and below -200% a LongsTZ.
+ Narrow version to save screen space.

+ Filter based on CSM/RT with strong and weak currencies levels.

+ 3BQ module, showing direction based on 3 time-frames comparing each one to CSM/RT.

+ Bias shows two additional time periods (medium and long term - can be hidden/disabled).

+ Maximum pips offset to allow [Auto] [Close] (order pips has to be greater than specified to effectively take action).
This a very experimental feature intended to cut potentially bad orders at their early stage, and allow your own trades
manager (i.e. DashTZ) take over those that surpass the specified level (suggested by braintheboss).

! Fixed bug reported at http://www.forexfactory.com/showthread.php?p=8785489#post8785489

! Some other bugs that I managed to catch since previous revision were resolved and probably new ones were introduced as well :)

=================================================================
DBMultiASMdevX006f2 (20160216): Most relevant since last update:

! Fixed an issue found in the new and experimental filter on previous[p] candle bar direction check that won't properly update in some cases.
If you didn't experienced issues, you can skip this update.just ignore this update.

=================================================================
DBMultiASMdevX006f1 (20160214): Most relevant since last update:

! Fixed bug reported in http://www.forexfactory.com/showthread.php?p=8752022#post8752022

+ One column/arrow Base|Quote [BQ] opposite direction trigger (experimental).
Might replace the prior one based on two columns/arrows (base and quote).
Both are intended to have the same behaviour and can be hidden, only differ by their cosmetic design.

+ Experimental filter based on Previous[p] candle bar direction.

=================================================================
DBMultiASMdevX006e4 (20160211152308): Most relevant since last update:

~ Strength% time-frames not correctly displaying their updated value after changing them in EA properties has been corrected.

! Some other bugs that I managed to catch since previous revision were resolved and probably new ones were introduced as well :)

=================================================================
DBMultiASMdevX006e3 (20160209105559): Most relevant since last update:

~ Bulk Set and Clear TP/SL changed it behaviour: Only orders with [SYMBOL(s)] enabled will be affected.

+ Current Daily Range [CDR] module.

+ BidRatio module [BidR%] with new way of displaying data +/- 100 (old one using 0 to 100 is still there).

+ Pips Since Open [PSO] have an upper limit now.

+ Pairs HeatMap% [HM%] have upper limits now.

+ PINS extended to 5 levels.
+ PINS exit on opposite signal can be standalone enabled now.
+ PINS reset button.

+ GAP exit on opposite signal.
+ GAP reverse it own signal.

+ Hard coded Session0: 24x5 (00:00:00 to 23:59:59).

+ Take snapshot at close (experimental): basket close and orders closed by exit on opposite signal.

~ Disabled[D] filter experimental scopes added: Pivot nor Fibonacci no trigger zones.
Pivot nor Fibonacci filters should not be hidden for these new scopes to properly work.

+ Pivot points Trigger Zone [PTZ] filter (experimental): W1 (in addition to previously added D1).
Two hard-coded trigger zones: Pivot to R2 for Longs[L] and Pivot to S2 for Shorts[S].
It will show a text (and tool-tip) representing where the current bid price is in relation to Pivot/S&R.
Avoid trades around levels by the specified amount of pips. Requires the PTZ filter enabled or to be selected as Disabled[D] filter scope not hiding PTZ.

+ Fibonacci Trigger Zones [FTZ] filter (experimental): D1 and W1.
Two hard-coded trigger zones: High to High+100(+200) for Longs[L] and Low to Low-100(-200) for Shorts[S].
It will show a text (and tool-tip) representing where the current bid price is in relation to levels.
Avoid trades around levels by the specified amount of pips. Requires the FTZ filter enabled or to be selected as Disabled[D] filter scope not hiding FTZ.
Values for upper and lower levels are hard-coded by now and are as follows:
Target 6 = 100.0 % ( Upper T6 = High+T6% | Lower T6 = Low-T6%)
Target 5 = 76.4 % ( Upper T5 = High+T5% | Lower T5 = Low-T5%)
Target 4 = 61.8 % ( Upper T4 = High+T4% | Lower T4 = Low-T4%)
Target 3 = 50.0 % ( Upper T3 = High+T3% | Lower T3 = Low-T3%)
Target 2 = 38.2 % ( Upper T2 = High+T2% | Lower T2 = Low-T2%)
Target 1 = 27.2 % ( Upper T1 = High+T1% | Lower T1 = Low-T1%)
Target 0 = 0.0 % ( Upper T0 = High+T0% | Lower T0 = Low-T0%)

+ Strength% time-frame added.
+ Strength% time-frames can be interactively enabled/disabled.
~ Strength% was not properly obeying upper limit on triggering.

+ MA time-frame added.
+ MA time-frames can be interactively enabled/disabled.
+ MA period is time-frame independent now.

+ Candles: very experimental reverse signal of each individual time-frame.

! Open chart button bug fixed (it sometimes loaded a chart in the EA one, unloading it).

! Some sanity checks added (experimental). Needs further testing.

~ Suffix auto-detection improved (needs further testing).

+ Close[C] button to allow/deny triggering of exit alerts when in [Auto] mode.

!!! Important notes about exit on opposite signal:
It requires [SYMBOL], [Auto} and Close[C] enabled to effectively close the matching orders.
If multiple [X] are enabled, all must match to produce a close alert (perhaps a match-any could be added later?).
Close alerts will be shown in Close[C] column and only on symbols having orders matching the criteria.

+ New script to load historical data: [MQL4\Scripts\LoadHistory-1 script(ASM)].

~ Updated DBMultiASM_MADdash_PIN_v2.0 supporting 5 PINS. Overwrite the already installed one [MQL4\Indicators\PINS].

As usual ... many bug fixes and some new ones as well ...

=================================================================
DBMultiASMdevX006d1: Since last update:

~ Pivots calculations when Monday has been corrected.
~ Strength% module was not properly obeying upper limit at colouring its values and has been fixed.

=================================================================
DBMultiASMdevX006d: Since last revision:

+ Experimental trigger on Base|Quote arrows direction. (This might replace the current behaviour of [D]isabled filter).
Base increasing and Quote decreasing triggers longs.
Base decreasing and Quote increasing triggers shorts.

+ Very Experimental filter based in Pivots Points and Trigger Zones [PTZ].
There are two hard-coded trigger zones: Pivot to R2 for Longs and Pivot to S2 for Shorts.
It will show a text (and tool-tip) representing where is the current bid price in relation to Pivot/S&R.
There are options to avoid trades around Pivot/S&R by the specified amount of pips when the filter is enabled (this could be a separated filter).

~ Disabled[D] allow to choose if filter on 'SameDirection' or 'NotOppositeDirection' of Base|Quote arrows.
Until now it was filtering on 'SameDirection' only. This filter might be deprecated or replaced.

~ Magic number can be updated directly in the panel (experimental).

! Bug in session management has been fixed.
! Bug in Basket SL when used as interactive Profit Lock has been fixed.
! Bug in Basket Lock showing incorrect lock values in some scenarios has been fixed.

~ Time to end of daily session replaced by Broker server time (clock).

Several minor improvements or additions and some new bugs as usual as well.

=================================================================
DBMultiASMdevX006c: Not released

=================================================================
DBMultiASMdevX006b: Most relevant since last bundle/update...

The most important update is related to resources usage, it is now much lighter in CPU usage.

~ Basket SL in $ changed it behaviour and to effectively work as SL, a negative number is required, otherwise it will work as an interactive profit lock.
~ Basket TP in $ allow negative numbers now.

TP or SL in Pips or %ADR are unchanged by now, thus positive numbers must be used for either one.

~ Dashboard update time interval fixed.

+ Print slippage and time spent to place the order.

+ Time to end of daily session time (clock).

+ Pivot container now shows warning when price is around PL or R3/S3 (it isn't a filter, only a visual by now).

+ Pivot container now shows R3, R2, R1, PL, S1, S2 and S3 values in tool-tips.

+ Orders requiring TP/SL are opened with their corresponding stops now, so if an "invalid stops" error is returned by the server, the order is immediately rejected.
This is a big improvement over previous revisions where this was a two steps procedure. (orders placed with no stops and TP/SL set afterwards, ending with some orders -due to TP/SL too close to price- with no stops where a stop should have been placed). This modification aims to fix the referenced issue, rejecting orders with invalid stops in real time.

Some cosmetic changes because I'm not really happy yet with it current design.

As usual ... many bug fixes and some new ones as well ...

=================================================================
DBMultiASMdevX006a: Since last update...

* Stop trading after basket(s) amount set in preferences was not properly working in devX006.
This update aims to fix this issue. Please report back if it doesn't.

=================================================================
DBMultiASMdevX006: Since last bundle/update...

Pairs:
+ Filter what pairs are allowed to operate directly from the dashboard.
This means that we can now choose which pairs we want to let the EA to consider when in auto-mode.
The default in this revision is all unselected, and an option to auto-enable all is included in properties.
+ [ALL/NONE] (for all pairs) button at header of pairs container has been implemented to perform bulk enable/disable of pairs.
This button will select or deselect all based on last action taken.
+ Basket buttons to enable/disable pairs in the dashboard implemented.

Filters:
~ ADR filter was not properly filtering and has been fixed.
+ Narrow pairs HeatMap version added and its default now. It now supports all the 9 regular time-frames as well.
+ BidRatio upper and lower limits for trigger.

HeikenAshi:
+ HA options to allow the user to select what time-frames to be used for direction directly at EA preferences.
+ HA TF buttons changed it behaviour, time-frames can now be selected live to enable them to be used for direction.
+ HA filter button changed it behaviour a little bit as well, now it is more like the Candles button is.
+ Choose the HA candle for open/close comparison.

Summarizing how the HeinkenAshi module will work in this revision: the time-frame buttons will enable each time-frame
to be used for direction matching, but they will not activate the filter by themselves (as in the previous release),
to do so, the main HeikenAshi button must be used (requires at least one time-frame enabled for direction).

Parabolic SAR [NEW]:
+ Parabolic SAR covering all regular time-frames. (HA must be disabled by now because of an issue I'm trying
to figure out how to handle, so for the time being, both cannot be activated at the very same time)
+ Choose the PSAR candle for PSAR/open comparison.

Candles:
+ Buttons to enable/disable time-frames for direction matching without having to go to preferences.
This can be updated live now. These tiny buttons have tool-tips that will help on identify their time-frame.

News:
+ Option to open news URL when a pair/currency displays news alerts.
This has been added to the two news modules available right now.
The news URL can be customized in preferences. The default is the Forex Factory one.
~ Rewrite most of the news module (bugs fixes and optimization, and probably new bugs)

Charts:
+ Dedicated button to open charts [~]
+ Button to open charts of all selected pairs [+] at header of the new charts module (it might be relocated afterwards)
+ Button to close charts of all selected pairs [-] above the previous buttons (it might be relocated afterwards)
+ Basket buttons to open all pair charts of the given currency.

Sessions:
+ 4th session added.
+ Option to reset/preserve data between sessions
+ Option to reset/preserve data when back from preferences
+ Reset lot size when clicking on it own button.
+ Session shows as closed while in weekend. Needs further testing.

Other:
+ Many tool-tip's improved
+ This revision should be more CPU friendly. If you have issues regarding high CPU usage, HeatMaps and indicators (HA in particular) are very CPU intensive.

As usual ... many bug fixes and some new ones as well ...

=================================================================
DBMultiASM(10230)devX201511272338b:

+ Tool-tips added to many elements, mostly to the new ones and to the ones I have found to be more important... so most are self explanatory...

+ Gauge bar intended to measure the market tendency/sentiment. It is an experiment based on pure mathematics over the market data stream (it still has room for enhancement).

! A bug not auto-enabling filtering on HA when enabled in settings was found and fixed.
! An issue related to the possibility to enable/disable individual HA time-frames once the HA filter is active is now resolved.

=================================================================
DBMultiASM(10230)devX201511191252:

This is mostly a bug fix update related to the news alerts that were not being cleared in basket block neither in pairs rows when they should.
If you still find this update too buggy, please stick to the previous one that works for you while next comes. I have some on going things I don't want to mix.

=================================================================
DBMultiASM(10230)devX201511182007:

The most important thing on this update is that it seems that I managed to fix the issue related to the news alert being deactivated/activated again during news releases time. I kept a close eye during latest news releases and it did pretty well here, so let's see how it does there. I wouldn't post an update yet if it weren't for that ugly bug...

+ NewsCal can be used from inside the Dashboard. NewsBrk as well. Both indicators required (and included in package).
NewsCal is the default news "viewer" in this update, but the previous one can be selected instead.
+ Allow to choose if auto-add magic number to order comment. [NEW] Needs further testing.
+ Allow to choose maximum size of order comment. It will be trimmed to specified size if greater. [NEW] Needs further testing.
+ Added new clock (external one dropped)
+ LongAll and ShortAll buttons added. Needs further testing.
+ Shows range since last D1 (Last Hi&Lo as well). Needs further testing/checking, review and "design"
+ Many tool-tip's added. Needs to add more though... in progress..
+ News column impact will be colored based on chosen impact when in the on-hold time window. Needs further testing/checking.
+ News alert on basket module added. Needs further testing/checking.
+ News blocking mechanism reworked and fixed. Needs further testing.

=================================================================
DBMultiASM(10230)devX201511161356:

Some new things added, mostly related to usability, like...

+ Enable/Disable modules done (almost any column can be disabled/hidden).
+ Screen-shot at order open added (screen-shot will be saved in "MQL4\Files\DBMultiASM\" folder).
+ TP/SL in Pips added to the interactive box (please note that Pips overrides %ADR, in case you set both, Pips will take precedence).
+ Experimental MADdash based Heat-map for basket and general purpose. (MADdash must be loaded on any regular chart, have global variables setting enabled and the time-frames you want to be "read" selected). Colouring this HeatMap is in progress.
+ Experimental CSM Heat-map for basket and general purpose. I've set it to be the default, but it can be changed in preferences.
+ Text box to have a brief description of current settings added.

Some other minor fixes and features I don't recall right now were added, and new bugs as well

=================================================================

DBMultiASM(10230)devX201511131601.deploy:
DBMultiASM(10230)devX201511132329.update:

Nothing really new, this is mostly a bug-fix release. I spent most of the time in a sort of bugs-hunting session.

Among others, I was reviewing the news module and made some changes that I expect to do better next week.

I have also added a very experimental MTF CSM for both, basket and general purpose, by the way, Modoki is still the default on both. CSM should be chosen in options (independent options for basket and general one) and if so, it will be displayed in place of Modoki, so in this release, both cannot be displayed at the very same time. If you want both, enable MTF_CSM and load your own Modoki (If you want it and don't have one yet, it is easy to find by using the paperclip at the top of the page or you can also find it in the package of the first upload I made)

Mandatory bug-fix update added. Fixed bug reported in #Post 12380 here. Install fist package first, then overwrite EA with the one in the latest package.

=================================================================
DBMultiASM(10230)devX201511091622:

Sadly, the reported issue related to news (placing orders during the hold after news time, with the [N]ews header enabled and red [N] in the respective pair row) is intact, so it needs more testing to try to find what's wrong with it. While doing a visual review of the code I didn't found anything looking bad yet, BTW I'll keep an eye on it since I want it to be confident or not to be.

I have also added some toys to try and test if they worth being improved.. like a GAP alerts counter (needs work and fine tuning yet... I'm thinking on adding a sort of buffer in time before increasing count and to use as filter like... to place an order only after N alerts in the same direction... or after a change in GAP direction is detected or so.. open to ideas).

Another toy to play with is something to allow the dashboard to receive alerts of external indicators in other charts. To achieve this, the required indicator(s) should be adapted to allow inter-operation with the dashboard. A good sample scenario for that would be to import alerts exported from something like MADdash., btw, AFAIK, it doesn't export it alerts and it source code is not available to be adapted. Anyway, it doesn't have to be an MTF indicator (better if it is, of course.. less chart windows), it can be any indicator on any regular pair chart window. This feature is immature and still under heavy-development and is not enabled by default since it needs indicators to be adapted and it stills doesn't work as a filter to auto-trade yet, it only shows alerts provided by adapted indicators loaded in other chart windows by now.

! major bug in MA arrows fixed.
! major bug in Candles highlighting fixed.

The H|D|N boxes at the left of the Currencies/Basket block are only representative by now and will not show anything in this version.

=================================================================
DBMultiASM(10230)201511050110: initial release

Спойлер

Generic bug-fix updates, the most relevant are below:

DBMASMEAX007a3.bundle3 (20161111): rev.update.012.7
! http://www.forexfactory.com/showthread.php?p=9247988#post9247988
! http://www.forexfactory.com/showthread.php?p=9247458#post9247458

DBMASMEAX007a3.bundle3 (20161110): rev.update.012.7
! http://www.forexfactory.com/showthread.php?p=9246097#post9246097
! http://www.forexfactory.com/showthread.php?p=9245159#post9245159
! http://www.forexfactory.com/showthread.php?p=9240003#post9240003

DBMASMEAX007a3.bundle3 (20161101): rev.update.012.6
! http://www.forexfactory.com/showthread.php?p=9229076#post9229076
! http://www.forexfactory.com/showthread.php?p=9230115#post9230115

Ссылки на все ПИН-ы, которые можно использовать как сигналы на ВХОД/ВЫХОД:

Спойлер

Stuff to test, by now it's only SSRC2EAX(single):
Attached File http://www.forexfactory.com/attachment.php?attachmentid=2047408&d=1477335714

Tools spread around (if not latest, you can easily find latest by following the paper clip at top of the each thread page)
Ragusa's PIN_MovingAverage current cross_28 pairs_v2 (#Post 2,999) http://www.forexfactory.com/attachment.php?attachmentid=2058274&d=1478557866
Hotpotato's EAX_APRangesv1.00 (#Post 2980) http://www.forexfactory.com/attachment.php?attachmentid=2058206&d=1478551509
Hotpotato's EAX_DWMRangesv1.01 (#Post 2692) http://www.forexfactory.com/attachment.php?attachmentid=2048912
Hotpotato's cDash2EAX at Post #1742. http://www.forexfactory.com/showthread.php?p=9154789#post9154789
honestknave's csDash at Post #1 of it own thread. http://www.forexfactory.com/showthread.php?t=537107
honestknave's MADdash at Post #1 of it own thread. http://www.forexfactory.com/showthread.php?t=545718

Денис, привет. На ФФ HP выкладывал свой пин, который показывает когда цена находится около уровней RDH RDL RWH RWL и другие. Мне нужно что бы он показывал, только когда цена находится около уровней RDH RDL RWH RWL, что бы не сигналил на промежуточных, я пытался его настроить, но у меня почему то он сигналит как "светофор". Ты не разбирался с ним, сможешь мне помочь его настроить? Спасибо.

На 09.11.2016 - последняя доска...

хех ... это уже НЕ последняя. Вот последняя:



Денис, привет!!! может ты мне поможешь, не работает CsDash... скрин с ошибкой во вложении.
заранее благодарю!

Что то тема затихла...ну тогда для подогрева интереса, ловите скрин торговли сегодняшнего дня....

Что то тема затихла...ну тогда для подогрева интереса, ловите скрин торговли сегодняшнего дня....

Что то тема затихла...ну тогда для подогрева интереса, ловите скрин торговли сегодняшнего дня....

Что-то я 7-ю полную сборку толком и не нашел.

DBMASMEAX007a3.update012.7.zip106 скач.

Что Вы подразумеваете под полной сборкой?

Что то тема затихла...

Добрый день.
Кто бы смог сделать что бы в доске Dashboard - Currency MeterV3M выдавался звуковой аллерт при заданном значении силы валюты.

Добрый день.
Кто бы смог сделать что бы в доске Dashboard - Currency MeterV3M выдавался звуковой аллерт при заданном значении силы валюты.

csDash.ex48 скач.

Добрый день. Кто-то торгует еще каками-нибудь досками? интересует basket trader v6 or v7

Всем доброго времени суток, долго отсутствовал что то, в последнее время много нового на ФФ появилось, поэтому решил все собрать все PIN в один архив и выложить здесь, может кому понадобится
Так же выкладываю новую версию доски от aeseme DBMASMEAX007a3.update012.8.zip

DBMASMEAX007a3.update012.8.zip104 скач.
EAX_PINS.zip114 скач.

Торги за сегодня Лондон
И итого с 30 января

Торги за сегодня Лондон
И итого с 30 января

---

Добавлено: 06-02-2017 15:20:48

---

Нью-Йорк сейчас

Торги за сегодня Лондон
И итого с 30 января

---

Добавлено: 06-02-2017 15:20:48

---

Нью-Йорк сейчас

Отличные результаты. А входа получается вообще без фильтров? Только на закрытия фильтры стоят?

EAX_PIN_HASDirectionCrossBeta_v1.02.zip59 скач.

[SPOILER]

Торги за сегодня Лондон
И итого с 30 января

---

Добавлено: 06-02-2017 15:20:48

---

Нью-Йорк сейчас

Отличные результаты. А входа получается вообще без фильтров? Только на закрытия фильтры стоят?

Да входа без фильтров
С выходом пока нет определенного решения....

Спойлер

[SPOILER]

Торги за сегодня Лондон
И итого с 30 января

---

Добавлено: 06-02-2017 15:20:48

---

Нью-Йорк сейчас

Отличные результаты. А входа получается вообще без фильтров? Только на закрытия фильтры стоят?

Да входа без фильтров
С выходом пока нет определенного решения....

Трал корзины по общему профиту м.б.?

Только проговорили про выходы, как появился новый инструмент на ФФ:
Перевод от переводчика:
EAX_PIN_TRAILING_STOP является сервером индикатор pin для использования с ЕАХ приборной панели.
Этот показатель будет след средняя прибыль каждой пары, используя некоторые скользящий режим.

Пример:
У вас есть 3 сделки на продажу, открытые по EURUSD, и вы устанавливаете режим след из точек и смещение 100 (баллы), используя PIN-код 6 для сигнала закрытия.
Индикатор будет рассчитать точку безубыточности в 3 торгах и хранить это значение в глобальную переменную EURUSDpin6_Buy_BreakEven.
Теперь, когда bid_price превышает точку безубыточности на указанную сумму Трейл (100 баллов в этом случае) Индикатор будет храниться цене стоп-лосс в глобальной переменной EURUSDpin6_Buy_StopLoss. Сохраненные цена продолжит след растет цена предложения.
Наконец, когда цена bid опустится ниже Глобальный стоп-лосс, контакт 6 будет равно 2 (Продам). Так что если вы установите контакт 6 в приборной панели, чтобы выйти на противоположный сигнал вы можете использовать это, чтобы закрыть сделку.
Сделки на продажу работают аналогичным образом, используя продадите глобальные переменные и выдачи сигнала на покупку, когда сл пересекается.

EAX_PIN_TRAILING_STOP.ex430 скач.